Main menu:
These modules can be used to add additional ports to an IP systems. The number of expansion modules
supported depends on the control unit type.Expansion modules, except the WAN3 10/100 module, connect
to expansion ports on the rear of the control unit, using a cable supplied with the expansion module.
No other cable should be used. The WAN3 10/100 module differs in that it connects via a LAN port on its
front to one of the control unit's LAN ports. Each module uses an external power supply unit supplied with the module.
Avaya IP500 Digital Station 16
Provides an additional 16 digital station (DS) ports for digital telephones
Supported on IP500 and IP500V2 Control Units
Supports 1400, 5400, 2400, 6400, 4400 Digital Phones
Avaya IP500 Digital Station 16A
The DS16A allows you to add your Nortel M or T series digital phones to IP Office Connections made through an RJ21 connector. This module does not support any Avaya phones.
Provides an additional 16 digital TCM ports for Nortel digital telephones
Digital station ports for use Nortel M7000 and T7000 digital phones
Supported on IP500 V2 running IP Office 7.0 running in IP Office mode or Quick Version mode; IP Office 8.0 or higher running Basic Edition or higher
Avaya IP500 Digital Station 16B
The IP500 Digital Station 16B provides 16 additional digital station ports for your Avaya IP Office system. For IP Office 9.0 or higher, the digital station ports can be used as DS or TCM ports.
Provides an additional 16 digital station ports for digital telephones
Added functionality for IP Office 9.0 or higher - Module can support either DS ports or TCM ports, but not both simultaneously
DS ports support Avaya 1400, 2400, 5400, and 9500 series telephones
TCM ports support Avaya/Nortel M7000 and T7000 series telephones
Avaya IP500 Digital Station 30
The IP500 Digital Station 30 provides 30 additional digital station ports for your Avaya IP Offce system
Provides an additional 30 digital station (DS) ports for digital telephones
Supported by IP Office core software level 2.1(31) minimum
IP403, IP406 V1, IP406 V2, and IP412 IP500 running R4.2 or earlier; Professional Edition is required
IP500 running R5.0 or higher
IP500 V2 control unit running R6.0 or higher
Digital station ports for use with 1400, 2400, and 5400 series digital telephones; also compatible with 9500 series digital phones on IP Office R7.0 or higher
Compatible with 3810 wireless telephone
Avaya IP500 Digital Station 30A Module
This Module provides 30 digital TCM ports for Nortel digital telephones. It connects to your IP Office 500 V2 control unit. It can be wall mounted or rack mounted near the control unit.The DS30A allows you to add your Nortel M or T series digital phones to IP Office Connections made through two RJ21 connectors. This module does not support any Avaya phones.
Supported on IP500 V2 running IP Office 7.0 running in IP Office mode or Quick Version mode
Digital station ports for use Nortel M7000 and T7000 digital phones
Also compatible with Nortel 4100 and 7400 series phones when used with a Digital Mobility Solution
Avaya IP500 Digital Station 30B Module
The IP500 Digital Station 30B provides 30 additional digital station ports for your Avaya IP Office system. For IP Office 9.0 or higher, the digital station ports can be used as DS or TCM ports.
Povides an additional 30 digital station ports for digital telephones
On IP Office 9.0 or higher, both DS ports and TCM ports are supported but not simultaneously
DS ports support Avaya 1400, 2400, 5400, and 9500 series telephones
TCM ports support Avaya/Nortel M7000 and T7000 series telephones
Avaya IP500 Analog Trunk 16
Provides an additional 16 analog trunks to your IP Office system
Supports both loop start and ground start
Trunk ports 1 and 2 automatically switch to power fail sockets on the rear of the unit during power outage
Supported on IP500 and IP500 V2 control units
On IP Office Partner Version, Norstar Version, and Quick Version, only one IP500 Analog Trunk 16 module is supported.